Making The Hanger










lay your two pieces of fabric right sides jointly. place the coat hanger on the part of the fabric so that the hock is approximately 1.5cm in from the edge. draw around half the hanger.leaving a border 1.5cm .








Cut OUT these shapes.then repeat on the lower part of the fabric : you should have four
shapes altogether .











SPRAY THE hanger with fabric adhesive then wrap the strips of wadding around it. put an
extra square of wadding over the ends of the
hanger in next step....








PLACE THE cut-out pieces right sides together.pin them.then sew all the way round .leaving the short straight end open turn the right way out and press.you will have two matching "sleeves".slip the fabric sleeves over each side of the hanger .








FOLD IN the fabric at the join .then and stitch the two sleeves together .dont worry too much about stitching neatly as this will be covered ribbon.








Glue a piece of decorative ribbon over your stitches .and finish off with a little bow . if you like .pop a little fabric adhesive on to the hook and wrap ribbon around it to finish .

Make Patterns for Sewing Your Own Clothes Patternmaking Templates - Slopers

 Make Patterns for Sewing Your Own Clothes          Patternmaking Templates - Slopers  


If you sew your own clothes, you may have considered making your own sewing patterns.   Where does making your own patterns begin?  The better place to start is with a patternmaking template - which is seldom if ever, called “a Patternmaking Template”.  It may be called a requisite ic prevent, a sloper, a fitter or something else that means a plain starting shape for adapting into patterns for making stylish garments.
   There are several ways to get a patternmaking mould, but we will consider the three easiest: 

       1. Purchase a requisite sloper from a pattern catalogue.
 Even patternmaking companies use slopers (templates) at the beginning of making patterns that appear in their catalogues.  Pattern lists usually include a pattern that can be used as a template by you for styling other  mn patterns as well.

Advantage: Readily available

 Disadvantage:  Available in standard sizes only

           2. Draft a sloper for yourself manually
 You could use a set of instructions and basic drafting tools to manually draft your slopers for thyself.  orders can be found at such places as libraries, bookstores and a variety of on-line sources.

 Advantage: You can use you own measurements and make your template personal.
 Disadvantage:  This is a long and uninteresting process for people unfamiliar with drafting.

      3. Use a computer to rough copy your patternmaking template digitally
  Use CAD (Computer Aided Drafting) programs or CAD related technology to draft your slopers to your specific gauge. Some programs rely upon an extensive list of measurements and others rely upon sophisticated algorithms applied to fewer measurements that are then used to calculate others.

Advantage: The computer calculates and prints your patternmaking template(s).
                   The templates can generally be styled and stored using a CAD system.
 Disadvantage:  All are person having different strengths & weaknesses

       The original starting slopers are bodice and kilt, but there are others that include a combination or adaptation of these first basics as well.  Examples include pants and blouses.
        Start with a template that is most suitable for your project; for example, beginning a waist free gown from a casing sloper or a gown with a waist from the combination of skirt and bodice slopers.
       Creating your own patterns is an splendid way to increase your sewing contentment.  No longer will you have to combine pattern pieces from other patterns to get just the one that you want.

The next move is fitting your requisite slopers to use as pre-fitted patternmaking templates.